|
|
 |
Basic Troubleshooting:
Uplink Connectors
The GBIC Interface is the industry standard for Gigabit Ethernet Interfaces.
The Gigabit SFP module inserts into the Mini GBIC port to create a new Gigabit port. The hot-swapping feature on the IntraCore IC3724PWR lets you install and replace the SFP transceivers while the system is operating; you do not need to disable the software or shut down the system power.
To install the module, do the following:
1- Insert the transceiver with the optical connector facing outward and the slot connector facing down. The module is keyed to help establish the correct position.
2 - Slide the SFP transceiver into the slot until it clicks into place.
3 - Remove the module’s rubber port cap.
4 - Connect the cable to the Gigabit SFP module’s port.
|
|
